|
|
Planetarium with coffee
Vlčková, Sabina ; Třeštíková, Ing Jana (referee) ; Berková, Petra (advisor)
Thesis on "Planetarium with coffee" is processed in the form of project documentation for construction. The proposed facility is designed as a two-storeyed without basement with the main ground plan dimensions of 52,8 x 27,47 m and is located near the village Lošov close to Olomouc. The building is operationally divided into a part intended for public entrance and a part for operation and maintenance. Loadbearing structural system is reinforced concrete monolithic skeleton based on monolithic reinforced concrete foundation footings. Ceiling structure consists of reinforced concrete, monolithic, locally supported, cross reinforced floor slab. Vertical external walls are made of ceramic blocks with contact thermal insulation system. Part of the front rounded facade is designed as glass fronted. The building is covered by a warm flat roof. Roof cladding consists of vegetation layers, walkable terrace or non-walkable structure of roof cladding. The planetarium itself is covered by a reinforced concrete dome with a thermal insulation layer of plates of foamed glass. Fillings of doors and windows are made of aluminum profiles with isolating triple glazing. The building meets the requirements for barrier-free use of buildings.
|
|
|
Mountain hotel
Vandrovec, Aleš ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.
|
|
|
Residential building in Zlin
Jelínek, Roman ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.
|
|
|
Usable properties of plastic and aluminium windows installed in the building
Gabriel, Jindřich ; Skříček, Darek (referee) ; Šťastník, Stanislav (advisor)
The bachelor thesis deals with the thermal insulation of individual parts of doors and windows made of aluminium and plastic profiles. At the same time, the manufacturing processes for the production of these openings of the building structures are described. In addition, the requirements for placing the product on the market and the assessment of utility properties according to the currently valid standards are summarized. Contemporary profiles, insulating glass, spacing frames, window and door fittings and thermal treatments are also described. The practical part of the bachelor thesis is devoted to the determination of the temperature distribution, the temperature gradient and the distribution of the heat flows on the selected window type for four different ways of incorporation into the building structure. In conclusion, all the findings are summarized and a discussion about the achieved results is made.
|
|
|
Usable properties of plastic and aluminium windows installed in the building
Gabriel, Jindřich ; Skříček, Darek (referee) ; Šťastník, Stanislav (advisor)
The bachelor thesis deals with the thermal insulation of individual parts of doors and windows made of aluminium and plastic profiles. At the same time, the manufacturing processes for the production of these openings of the building structures are described. In addition, the requirements for placing the product on the market and the assessment of utility properties according to the currently valid standards are summarized. Contemporary profiles, insulating glass, spacing frames, window and door fittings and thermal treatments are also described. The practical part of the bachelor thesis is devoted to the determination of the temperature distribution, the temperature gradient and the distribution of the heat flows on the selected window type for four different ways of incorporation into the building structure. In conclusion, all the findings are summarized and a discussion about the achieved results is made.
|
|
|
Planetarium with coffee
Vlčková, Sabina ; Třeštíková, Ing Jana (referee) ; Berková, Petra (advisor)
Thesis on "Planetarium with coffee" is processed in the form of project documentation for construction. The proposed facility is designed as a two-storeyed without basement with the main ground plan dimensions of 52,8 x 27,47 m and is located near the village Lošov close to Olomouc. The building is operationally divided into a part intended for public entrance and a part for operation and maintenance. Loadbearing structural system is reinforced concrete monolithic skeleton based on monolithic reinforced concrete foundation footings. Ceiling structure consists of reinforced concrete, monolithic, locally supported, cross reinforced floor slab. Vertical external walls are made of ceramic blocks with contact thermal insulation system. Part of the front rounded facade is designed as glass fronted. The building is covered by a warm flat roof. Roof cladding consists of vegetation layers, walkable terrace or non-walkable structure of roof cladding. The planetarium itself is covered by a reinforced concrete dome with a thermal insulation layer of plates of foamed glass. Fillings of doors and windows are made of aluminum profiles with isolating triple glazing. The building meets the requirements for barrier-free use of buildings.
|
|
|
Mountain hotel
Vandrovec, Aleš ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.
|
|
|
Residential building in Zlin
Jelínek, Roman ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.
|
guest ::
